manualshive.com logo in svg

Unicorn Electronics ENDAT-3201M, User Manual

Share
Download
Unicorn Electronics ENDAT-3201M User Manual Download Page 10

4 

The ENDAT-3201M Embedded CPU Board 

1-2. Unpacking 

The motherboard comes securely packaged in a sturdy cardboard shipping carton.  In 
addition to the User's Manual, the motherboard package includes the following items: 

• 

ENDAT-3201M 5.25” SBC /  CPU Board 

• 

HDD/FDD Cables 

• 

TV-Out adapter / cable 

(Optional)

 

• 

Audio Kit

 (Optional)

 

• 

LCD cable

 (Optional)

 

• 

IDE Driver includes: Drivers for Windows NT 3.x/4.x, Windows 95, 98, 2000, 
Win Me, Linux, Novell Netware and AMI FLASH ROM utilities. 

• 

Driver utilities for on-board VGA drivers, LAN adapter and DOC 2000 

If any of these items are missing or damage, please contact the dealer from whom you 
purchase the motherboard.  Save the shipping material and carton in the event that you want 
to ship or store the board in the future. 

Note: 

Leave the motherboard in its original package until you are ready to install it!

 

1-3. Electrostatic Discharge Precautions 

Make sure you properly ground yourself before handling the motherboard, or other system 
components.  Electrostatic discharge can easily damage the components.  Note: You must 
take special precaution when handling the motherboard in dry or air-conditioned 
environments. 

 

Summary of Contents for ENDAT-3201M


































































Reviews:

No comments

Brands by name

Popular brands

Load more brands