UNICOM FEP-72104T, User Manual

Page: 8 / 22

Hardware Description
This Section describes the Router hardware and provides a physical and
functional over view.
The physical dimensions of both routers are:
145mm x 26mm x 85mm (L x W x H)
Top View
The upper view of the Micro-Routers consists of one 10/100Mbps WAN
por t, four or seven 10/100Base-TX RJ-45 (Auto MDI/MDIX) Ethernet
por ts, and a Power LED indicator.
Rear Panel
Connect the female end of the power adapter to the por t labeled 9VDC
on the rear panel of your Micro-Router.
Note : Use only the included power adapter. Using the wrong adapter
may cause damage or injur y.
Default Button
If you forget your password or cannot access the Micro-Router, press the
Default button on the rear panel of the Router. This button re-installs the
factor y configuration file, replacing the current configuration with the
Router’s default settings. WARNING: All user settings will be deleted.
Configuration
In the Configuration window, users can reset the Router to its default
setting, backup the Router configuration, and restore the previously
saved configuration.
Reset to Default
1. Click button.
2. The Router will reboot.
Backup Configuration
1. Click button.
2. Save the backup file onto your computer hard disk or other
storage device.
Restore Previous Configuration
1. Click button to find the previously saved configuration file.
2. Click button.
35 6
Micro-Router/4 Micro-Router/7
Micro-Router/4 Micro-Router/7
Reset
Backup
Upload
Browse