Configure system MAC address.
1. WAN MAC Address: configure WAN MAC address.
•
Factory default:
Use the factor y default.
•
Spoof this computer’s MAC address-IP address:
Automatically
detects the router’s WAN MAC address.
2. Click button.
NAT Configuration
Configure the internal mapping por t for external accessing.
1.
Default Server:
A default ser ver receives packets from por ts that
are not specified in the mapping rule list. If you do not assign a
default ser ver, then all packets received for por ts not specified in
mapping rule table will be dropped.
16
25
Default Settings
The default Router configuration is as follows:
• IP address: 192.168.1.1
• Password: root
• Subnet mask: 255.255.255.0
• DHCP Ser ver (LAN): Enable
• DHCP Client (WAN): Enable
• Filter (WAN): Web ser vice
If you want to reset to the default configuration, press the "Default
Button" on the rear panel of the Router. Follow the steps below to reset
the Router to default configuration.
1.
Use a pointed object to depress the Default Button until the LAN
LEDs turn off and then release it.
2.
Wait about 10 seconds for the router to finish restar ting.
3.
When the Router restar ts, proceed to step 6. If the router does not
restar t, go to step 4.
4.
Cycle power off and on.
5.
Repeat steps 1 and 2.
6.
Login to Web Management to ensure the router is working properly.
Advanced Configuration
Advanced configuration provides a more detailed configuration of the
Router. User can configure the functions to specific needs.
Apply
Summary of Contents for FEP-72104T
Page 2: ......
