You are now in the WEB CONFIGURATION software. Follow the instructions
in the MAIN MENU to navigate screens or use the Help icon in the
upper right hand corner of the screen.
Click
WIZARD SETUP
for initial configuration.
Click
LOGOUT
at any time to exit the WEB CONFIGURATION.
31
10
18.
Active:
Enables this Filter Rule.
19.
IP Protocol:
Refers to the upper layer protocol, ex: TCP is 6, UDP
is 7.
20.
IP Source Route:
Enables or disables the rule to follow the IP
source route. “Yes” means enable. “No” means disable.
21.
Destination:
•
IP Addr:
The destination IP Address of the packet you wish to
filter. This field will be disregarded if it is 0.0.0.0
• I
P Mask:
The destination IP address mask.
•
Por t #:
The destination por t of the packets you wish to filter. The
range is 0 to 65535. This field will be disregarded if is 0.
•
Por t # Comp:
Select the destination por t of the packet that you
wish to compare against the value given in the Por t # field.
“None” means don’t compare.
22.
Source:
•
IP Addr:
The source IP address of the packet you wish to filter.
This field will be disregarded if it is 0.0.0.0
•
IP Mask:
The source IP address mask
•
Por t #:
The source por t of the packets that you wish to filter. The
range is 0 to 65535. This field will be disregarded if it is 0.
•
Por t # Comp:
Select the destination por t of the packet that you
wish to compare against the value given in the Por t # field.
“None” means don’t compare.
23.
More:
“Yes” means that a matching packet is passed to the next
Filter Rule before an action is taken. “No” specifies that the packet
is disposed of according to the action fields. If "Yes" is selected,
then Action Matched and Action Not Matched will default to "Check
Next Rule".
• When the More field is marked "No" the Action Matched field
offers three selections
* Check Next Rule - Checks next available Filter Rule.
* For ward - For wards the packets.
* Drop - Drops the packets.
• When the More field is marked "No" the Action Not Matched field
offers three selections
* Check Next Rule - Checks next available Filter Rule.
Now you will see the
Change the Password
screen. At this time Unicom
recommends you change the password. The password can be numbers or
letters in any combination. If you choose to change the password, type in
the new password in both boxes and click
. Choose
if you wish
to bypass this operation.
The password can be changed at anytime.
Apply
Ignore
Summary of Contents for FEP-72104T
Page 2: ......
