4
Revised 05/08/21
01865 767676
www.unicol.com
STEP 8
[OPTIONAL]
Optional shelf install.
Hook screws into keyhole slots in front of mast.
Fully tighten screw from rear.
STEP 7
Gently lower the screen until the arms are securely
hanging on top of the back plate. Once centered,
adjust the level of the screen with the two top
screws on the mount arms. Once levelled secure
the screen by tightening the bottom two screws.
STEP 6
Line the screen and arms up with the secured back
plate and offer it up at a slight angle - allowing the
top of the arms to hook over the lip of the back
plate.
STEP 5
Locate the mounting holes on the back of your
screen. Line the two mounting arms up and using
the taglocks/two part spacers provided and the
manufacturer recommended screws, attach the
arms to the back of the screen.
