5
Revised 05/08/21
01865 767676
www.unicol.com
STEP 1a
With mast laying flat on a table (as shown above)
pick up the base and offer the base to the mast.
Ensure fixing holes are aligned and then secure.
STEP 2a
Once secure, stand the stand upright and place
on a flat, stable surface. Mark position of holes, as
highlighted above, and fix into the floor.
Follow on from Step 3.
STEP 1b
Considering skirting boards and cable caddies,
offer the mast up to the wall using the wall bracket
as a guide with how far out you’d like it to sit (a).
Identify bolt down base positioning, mark and
fix into position. Follow Steps 2, 3 and 4 before
continuing to 2b.
STEP 2b
Gently place the mast over the base as shown
above - making sure cables don’t get caught. Mark
out the positioning for the wall tie, then fix to the
top of the Rhobus mast and the wall.
Follow on from Step 5.
BOLT DOWN
FLOOR-TO-WALL
a
