![background image](http://html2.mh-extra.com/html/unicaterm/eco-6/eco-6_user-and-maintenance-manual_3709049036.webp)
E N G
5 . ) # ! 4 % 2 -
3 6
3.5
COMFORT CLIMA OPTION
This option works particularly well for smaller spaces or in those times of the year when the outside
temperature is not too cold and the continuous operation of the stove is not needed.
This option is based on an automated process that switches off the stove when the desired set room
temperature is exceeded. The text CC OF will be displayed along with the remaining minutes until the
shut
-
down. When the room temperature falls again below the set value, the stove will restart
automatically. To activate this option ask the installer at the time of first activation.
4.0
REMOTE ACTIVATION OPTION (AUX port)
Through a specific cable (cod.640560) it is possible to switch on/off the stove by using remote device, such
as a GSM phone, room thermostat, home automation system, etc. To activate this option ask the installer
or a qualified technician, who should use a volt free contact device following this logic:
Open contact = stove off
Closed contact = stove on
Activation and deactivation occurs with a 10 minute delay from the last transmitted command.
When the remote activation option is on, it will still be possible to switch on/off the stove from the control
unit; the stove will respond by following the last command that has been received (either start or shut
down).
Notice that, in order to avoid any possible conflicts in the heating schedule, and only for models including
timer, the activation of the timer automatically excludes the remote activation (AUX port).
5.0
TIME SETTING
Press and keep pressed the SET button for 2 seconds. The text
Prog
should be displayed, meaning that
the setting menu has been accessed. By pressing
Ÿź
it will be possible to choose from the following
settings:
9
Pr OF
: Activates or deactivates the timer completely.
To activate the timer, press SET and select the
On
option by using
źŸ
. To deactivate it, select
OFF
Confirm the selection by pressing SET; to exit press ESC.
9
Set:
sets the current time and date.
To set the current time, keep
SET pressed for 2 seconds the display SET by using
Ÿź
and press
SET
to
confirm. Each time that
Ÿ
is pressed the time will be forwarded by 15 minutes, and each time
ź
is pressed
the time will be set back by 1 minute< press SET to confirm; Select the current day of the week by pressing
źŸ
( Monday=Day 1), press SET to confirm. To exit press ESC.
Summary of Contents for ECO 6
