SHIFT LEVER
CAUTION
Press the brake pedal to the floor before
operating the shift lever.
When the brake pedal is released, the truck will
creep or moves slowly if the shift lever is in
positions other than neutral “N”.
Do not release the brake pedal until you are ready
to start.
NOTE
The shift lever has a neutral switch. Before starting
the engine, make sure the lever is in neutral. The
engine won’t start if the shift lever is not in neutral.
The truck is equipped with a single shift lever on the
steering column (1 speed for forward and reverse).
When the shift lever is placed in the reverse position “R”,
the back-up lamp comes on and the back-up buzzer
sounds.
Bring the truck to a complete stop before reversing the
direction of travel, from forward to reverse or vice versa.
NOTE
The shift lever may be optionally located at the right
side of the steering column.
SHIFT LEVER
Fwd (F)
Neutral (N)
Reverse (R)
2-1
1
INSTRUMENTS AND CONTROLS
Summary of Contents for FD20 Series
Page 51: ...MEMO...
Page 91: ...MEMO...
Page 139: ...MEMO...
Page 156: ...CONTENTS 0 9 6 2 A E 6 2 E L 6 3 L R 6 4 R U 6 5 6 1 6 INDEX...