16 HEAD LIGHTS AND COMBINATION
LAMPS
Check for dirty or damaged lens of the head lights.
Check also the front and rear combination lamps (side
marker lights and turn signals) for a dirty or damaged
lens.
Close the engine hood
CAUTION
Take care not to pinch your fingers in the engine
hood.
Reinstall the right and left side-covers and floorboard.
Close the engine hood and lay the floor mat.
Get on the truck and sit down
17 SEAT BELT
Check that the seat belt:
strap is not broken or worn
•
anchorages to make sure they are not corroded and
•
securely attached to the vehicle frame
tongue and the buckle are not damaged and can be
•
engaged and disengaged properly
webbing does not have frayed stitching
•
18 ADJUSTING OPERATOR’S SEAT AND
STEERING COLUMN ANGLE
Adjust the operator’s seat to a position which provides
easy access to all foot and hand controls. Also make
sure you can operate the steering wheel smoothly.
After adjustment of the operator’s seat position and
steering column angle, lock the seat and steering
column securely.
19 SIDEVIEW MIRRORS
Check the sideview mirrors for contamination or
damage.
Adjust the mirrors to gain full rearview when you are
seated in the operator’s seat.
20 SHIFT LEVERS
Check the shift lever for looseness and smooth oper
-
ation.
4-12
PREOPERATIONAL CHECKS
Summary of Contents for FD20 Series
Page 51: ...MEMO...
Page 91: ...MEMO...
Page 139: ...MEMO...
Page 156: ...CONTENTS 0 9 6 2 A E 6 2 E L 6 3 L R 6 4 R U 6 5 6 1 6 INDEX...
