Unical XC-K oil 230, Installation And Maintenance Instruction

Page: 48 / 64

48
Default Individual values Value range Description
10 - 800 HOURS
SEQUENCE CHANGE
200 HOURS
CYCLE BLOCK
BOILER COOLING FUNCTION
BOILER COOLING TEMPERATURE
HS 1 TYPE
HS 2 STORAGE TANK
BUFFER
SCREED
HS 1 BUS
HS 2 TYPE
** see note SCREED PROGRAM
HYSTERESIS BURNER 2
* Set value of first stage of first boiler at 1, in the second leave dashes.
All other boiler stages must be disabled.
** See E8.5064 heating controller instruction book
Default Individual values Value range Description
DOMESTIC HOT WATER PRODUCTION
CHARGE PUMP
PARALLEL PUMP RUNNING
T DHW
DHW HYSTERESIS
5 degrees
DHW FOLLOWUP
THERMOSTAT INPUT
THERMOSTAT FUNCTIONING
Exit level using
RETURN
LOAD THROUGH
Default Individual values Value range Description
HEATING CIRCUIT 1
HEATING CIRCUIT FUNCTION
PUMP MODE
MIXER OPEN
MIXER CLOSED
MAX FLOW TEMPERATURE
MIN FLOW TEMPERATURE
FROST PROTECTION TEMP
OUTSIDE TEMP DELAY
HEATING SLOPE DISTANCE
B-HEAT SINK
Exit level using
RETURN
SEQUENCE MODE
00 min - 30 min 00 min
00 - 01 00
30°C - 120°C 95
00 - 06 05
01 - 03
01 - 01 - 02
00, 01 (OFF - ON)
00
00
00 OFF
00 - 04 04
00 - 05 00
2K - 20K 2K
01 - 06
01
00 - 01 (OFF / ON) 01 (ON)
00 , 01, 02, 03 01
00K - 50K 20K
5K - 30K
00 min - 30 min 00 min
00, 01 (OFF / ON) 00 OFF
00, 01 (OFF / ON) 00 OFF
00, 01 (OFF / ON) 00 OFF
00 - 04 0
00 - 03 0
5 - 25 ----
5 - 25 ----
20 °C - 110 °C
80 °C
10 °C - 110 °C 30 °C
(-15)°C - (5)°C 0 °C
0:00 - 24:00 0.00
00K - 50K 5 °C
00 - 01 (OFF / ON) 01