Unical XC-K oil 230, Installation And Maintenance Instruction, Page: 27 / 64

27
Tec
hnical f
eatures and dimensions
ENGLISH
N.B. For models from XC-K 124 to XC-K 400 (ref. fig. 18 and 19),
the casing and insulation are contained in 1 box marked:
43607 (XC-K oil 100)
43608 (XC-K oil 150)
43609 (XC-K oil 230)
43610 (XC-K oil 300)
N.B.
For models from
XC-K 350
to
XC-K 1550
(ref. fig. 19 and
20), the casing and insulation are contained in 3 boxes
marked:
43611 (front casing XC-K oil 350)
43612 (rear casing XC-K oil 350)
43613 (top casing XC-K oil 350)
43614 (front casing XC-K oil 400)
43615 (rear casing XC-K oil 400)
43616 (top casing XC-K oil 400)
43617 (front casing XC-K oil 500)
43618 (rear casing XC-K oil 500)
43619 (top casing XC-K oil 500)
43620 (front casing XC-K oil 650)
43621 (rear casing XC-K oil 650)
43622 (top casing XC-K oil 650)
43623 (front casing XC-K oil 850)
43624 (rear casing XC-K oil 850)
43625 (top casing XC-K oil 850)
43626 (front casing XC-K oil 1000)
43627 (rear casing XC-K oil 1000)
43628 (top casing XC-K oil 1000)
43629 (front casing XC-K oil 1300)
43630 (rear casing XC-K oil 1300)
43631 (top casing XC-K oil 1300)
43632 (front casing XC-K oil 1550)
43633 (rear casing XC-K oil 1550)
43634 (top casing XC-K oil 1550)
3.13 - PACKAGING
XC-K boilers are supplied complete with the door and smoke
chamber assembled, while the casing and insulation are
included in separate cardboard packs.
The panel and accessories are inside the combustion chamber.
Before starting installation, make sure that the length and width
of the boiler body received correspond respectively to the
dimensions P , Q and R of the boiler you have ordered, provided
on the previous tables, and that the boxes containing the
casing, or part of it, are marked as in the table at the bottom of
the page.
The casing of boilers from XC-K 100 to XC-K 300, complete
with insulation mattresses , is contained in one box.
The casing of boilers from XC-K 350 to XC-K 1550 is
contained in 3 boxes.
In addition to the panel board packed in its own box, the
following accessories are found in the combustion chamber:
- 1 box containing hydraulic connection flanges, with
relative gaskets and bolts (where included).
- ceramic fibre cord to insulate between burner blast tube and
door.
Upon reception, make sure that the supply is
complete and undamaged.
The packaging elements (cardboard box, straps,
plastic bags, etc.) must be kept out of the reach
of children as they are potential sources of
danger.
Unical will not be held liable for damage to
persons, animals or objects due to failure to
comply with the instruction above.
The document envelope contains:
- Water pressure test certificate
- System manager operating instructions
- Installation and maintenance instruction booklet
- Warranty
- Local ventilation requirements label.