Unical .it AQ 15, User Operating Instructions Manual

Page: 8 / 16

8
UT05
Adjustment of first heat stove ignition time
This parameter indicates the time when you wish
to ignite the heat stove: set the desired time with
buttons and , with 10-minute steps.
Press button to move to the next parameter.
UT06
Adjustment of heat stove extinction time
This parameter indicates the time when you wish
to extinguish the heat stove: set the desired time
with buttons and , with 10-minute steps.
Press button to move to the next parameter.
UT07
Select days of the week
Press the button to select the days of the
week, whereas by pressing button you enable
(ON) or disable (OFF) the heat stove ignition day
as shown in the following table:
Display
top
MEANING
Day 1
Day 2
Day 3
Day 4
Day 5
Day 6
Day 7
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
Display
bottom
ON1/OFF1-Yes or No
ON2/OFF2-Yes or No
ON3/OFF3-Yes or No
ON4/OFF4-Yes or No
ON5/OFF5-Yes or No
ON6/OFF6-Yes or No
ON7/OFF7-Yes or No
In the example below, the heat stove is lit on
Saturday and Sunday only.
Confirm and continue with button .
In case the stove is controlled by external ther -
mostat, when the thermostat reaches the pre-
set temperature, the heat stove display will read
“ECo TERM” .
Day 1
Mon
off 1
Day 2
Tue
Day 3
Wed
Day 2
Thur
Day 2
Fri
Day 2
Sat
Day 2
Sun
off 2 off 3
off 4
off 5 on 6
on 7
UT08 UT16
continue as above to set the second, third and
fourth ignition.
ATTENTION!
The room thermostat does not implement
the function of cycling the heat stove on
and off, but sets it to saving mode.
UT02
Set current hour
This parameter is used to set the current hour,
press buttons and to select the current
time.
Press button to move to the next parameter.
UT03
Set current minutes
Press buttons and to adjust the current
minutes.
Press button to move to the next parameter.
UT04
Set technical parameters
Press button to move to the next parameter.
Chronothermostat