Unical .it AQ 15, User Operating Instructions Manual

Page: 2 / 16

2
Dear Customer,
Installation must be performed by skilled personnel, who shall be entirely responsible for final installation and
consequent proper operation of the installed product. There shall be no liability on the part of the Manufacturer
in case of installation by unqualified person and in case of non-compliance with the general warnings and
installation instructions.
After removing the packaging, check integrity and completeness of the contents. In the event of non compliance,
contact the dealer the heat stove was purchased from.
Prior to installation it is recommended to perform accurate washing of all the system's piping in order to remove
any residues which might affect proper operation of the appliance.
In the event of not using the heat stove for a long time it is recommended to perform the following operations:
• disconnect the power supply plug;
• close water cocks, both of the heating and domestic hot water systems
• if freezing is likely to occur empty the heating and DHW systems.
Extraordinary maintenance of the heat stove must be performed at least once a year. This maintenance must
be scheduled in time with the Technical Support Service, and is borne by the Customer.
For safety it should be remembered that:
• Use of the heat stove by children or unassisted disabled persons is recommended against;
• do not touch the heat stove if you are barefoot and/or with wet or moist parts of the body;
• it is forbidden to modify the safety or adjustment devices without the manufacturer's authorisation or
instructions;
• do not pull, detach, twist the electrical wires coming out of the heat stove, even if it is disconnected from the
power mains;
• avoid blocking or reducing the combustion air duct, which is essential for proper combustion;
• do not leave packaging items within the reach of children or unassisted disabled persons.
ATTENTION!
During the first couple of heat stove operations, the vapours emitted by the paint may
cause unpleasant smells due to hardening, it is therefore advisable to aerate the room
well and avoid remaining long by the heat stove.
In the event of a fire, disconnect electric power, use an approved fire extinguisher and, if needed, call
the Fire Brigade. Then contact the Authorised Service Centre.
In congratulating you for purchasing one of our heat stoves, we would like to remind you that pellet heat stoves
are the most innovative heating solution, the result of the most advanced technology with an extremely high
level of workmanship quality. Their neat and elegant design fits well into any room and makes it cosy thanks to
the unique enveloping warmth that fire alone is able to give.
This manual will help you to use your heat stove correctly. We therefore recommend to read it carefully before
use.
The heat stoves work exclusively with wood pellet of maximum 6mm diameter, and are fitted with an exchanger
that produces approximately 90% yield.
The heat stoves are fitted with a timer-thermostat that assures up to 4 weekly on and off-cycles, thus making
control independent. The heat stoves convey heat to the radiators of your system with a thermal power that is
regulated according to the rooms to be heated: just manually set the water temperature of the heating system,
recommended to be at 60°- 75.°
The heat stoves are also fitted with tangential fan for spreading hot air, which allows forced convection heating
of the room where it is installed.
Thanks to an optional kit, they also produce continuous domestic hot water in a healthy and safe manner throu -
gh automatic operation, with no need for storage tank.
The heat stoves have been equipped with sophisticated automatisms and control and safety systems that
assure effective and convenient operation.
Installation and maintenance shall be effected by qualified personnel, in compliance with applicable laws in
force and according to the Manufacturer's instructions.
This operating and maintenance manual is an integral part of the product.
Before proceeding with installation, use and maintenance of the product, it is required to carefully read the
instructions in this manual.
This heat stove shall be intended solely for the use for which it was expressly designed. Therefore, any liability
for any harm to people, animals or damage to property for product misuse shall be borne by the user.