Unical INOXIA GJ 1000, Installation And Servicing Manual

Page: 40 / 56

40
Instructions for the installer
Default Personal values Value range Designation
HEATING CIRCUIT 2
00 - 04 CIRCUIT OPERATION 0
00 - 03 PUMP OPERATION 0
5 - 25 MIXER OPEN ----
5 - 25 MIXER CLOSED ----
20 °C - 110 °C MAX TEMPERATURE DISCHARGE 45 °C
10 °C - 110 °C MINIMUM DELIVERY TEMPERATURE 10 °C
(-15)°C - (5)°C ANTIFREEZE 0 °C
0:00 - 24:00 RIT-TEMP-EST 0.00
00K - 50K DIST-CUR-RIS 5 °C
00 - 01 (OFF / ON) OBLIDGE REDUCTION 01
Exit level using
BACK
Default Personal values Value range Designation
SOLAR M/F
00 - 26 FUNCTION MF (1-4) 00,00,01,02
00 - 03 MF (1-4) T- NOM 30°C
5 - 25 HISTERESIS (1-4) MF 5°C
5 - 25
FUNCTION F 15 0
Exit level using
BACK
°C
OK
1 2
1
2
>1s
+
°C
°C
°C
BUS ID 1/2/11/Mod
Run
2
1
PROGRAMMABLE PARAMETERS FOR TECHNICIANS OF THERMOREGULATOR
type Lago Basic 0201 RV 1
1
2
3
1 1) Set the switch on the burner (1)
2) Press the OK key (2)
3) Turn the knob (3) until it appears on the display mm (modulating burner)
4) Press the OK key (2)
2 1) Move the selector (1) the symbol of the mixing valve
2) Press the OK key (2)
3) Turn the knob (3) until the display shows the number 15 (the time of the servo-burner)
4) Press the OK key (2)
3 1) Move the selector (1) on the BUS ID
2) Press the OK key (2)
3) Turn the knob (3) until the display shows the number 1 (identification of the boiler)
4) Press the OK key (2). Turn the knob to position 1. RUN.
fig. 22