23
ENGLISH
Installation Instructions
CAUTION:
230 Volts cable must keep well separated by 24
Volts cable.
Outer sensor connection
- connect the wires on therminal,
(Y2 6-7) on BCM
Danger!
Only a qualified technician may perform the
electrical installation.
Before performing connections or any type
of operation on electrical parts, always dis-
The boiler is equipped with a power cable, boiler
installation requires electric al connection to the
mains power supply. This connection must be
made up to standard, as required the regulations
in force.
Remember that a bipolar switch must be installed
on the boiler power line with over 3 mm between
contacts, easy to access, making maintenance
quick and safe.
The power cable must be replaced by technical
personnel authorised by
Immergas
, using orig-
inal spare parts only. Failure to comply with the
above can jeopardise the safety of the appliance.
safety connection (*)
- Remove the jumper and connect the wires between terminals as indicated
Electric power supply connection
connect electrical power and make sure that it cannot be
reconnected accidentally.
See par. 4.5 positioning on the board
(*) Optional
safety
Conection
NOTE!
For more information
see Technical Info
from site indicated at pag. 2
Summary of Contents for ALKON 115 EXT
