UNICA TERM PLUS 12, User And Maintenance Manual

Page: 35 / 68

E N G
5 . ) # ! 4 % 2 -
3 5
3.3 AUTOMATIC OPERATION
The AUTOMATIC operation mode allows to set the temperature that you want to reach in the room where
the stove is installed. The stove autonomously adjusts the power based on the difference between the
temperature desired (set on the screen) and the temperature detected by the probe; once the desired
temperature is achieved, the stove will run at idle with power at 1.
To select the AUTOMATIC operation mode, press MENU and set 20°C, for example, on the screen.
Press + to increase the temperature or – to decrease it.
The AUTOMATIC mode allows to display the temperature desired and the current time one after the other.
3.4 PELLET LOADING ADJUSTMENT
Press Menu for two seconds and scroll the captions on the screen using +/– until you display “adjust
pellet”. Press Menu to confirm this function and to adjust the pellet loading. When you decrease the
number you decrease the pellet loading quantity and when you increase the number you increase the
pellet loading quantity.
This function can be useful when you change the type of pellet for which the stove was calibrated and
therefore when you need to readjust the loading. If this adjustment is not sufficient, please contact your
Technical Assistance Service to set the new operation conditions.
3.5 FRONT VENTILATION ADJUSTMENT
Press Menu for two seconds and scroll the captions on the screen using +/– until you display “FRONT
VENTILATION” (
VENTIL.FRONTALE ). Press Menu to confirm this function and adjust the ventilation level.
Use +/ - to select a minimum, medium or maximum ventilation for each power selected.
3.6 COMFORT CLIMATE FUNCTION ADJUSTMENT
This function is particularly suitable when stoves are installed in small rooms or during midseason periods,
where running the stove with a reduced power makes the room warm up excessively. This function runs
automatically and allows to turn the stove off when the temperature goes beyond the ambient
temperature desired. CLIMATE FUNCTION OFF (
OFF CLIMA ) will be displayed on the screen, which will also
state the remaining minutes to the shutdown. When the ambient temperature goes below the number set,
the stove turns on automatically and the screen displays START CLIMATE FUNCTION (
START CLIMA ). To
activate this function and for further information please seek the advice of your Technical Assistance
Service during the first ignition/installation.