Chapter5. System Configuration 64
⑤
Polarity:
Here, you have options for Horizontal, Vertical, Circular Left and Circular Right.
You need to know the polarity of the transponder that you want to scan.
⑥
FEC (Forward Error Correction):
You need to enter the exact FEC value of the
transponder that you want to scan.
⑦
Modulation:
Here you have two options for QPSK (SD) and 8PSK (HD).
⑧
Network Scan:
Here you have two options for
YES
and
NO
.
NO
is used to scan the
transponder (TP) based on the data that your UNIBOX HD1 currently has.
YES
is used to
scan the TP not just based on the existing TP data but also using new TP data, if there is TP
data newly transported from the TP. Naturally,
YES
option takes longer while it may results
in a better scan result.
⑨
Clear Before Scan: YES
is used when you want to delete the existing channel list before
you start the automatic scan. If you want to keep the existing list, select
NO
.
⑩
Only Free Scan:
Here you have two options for
YES
and
NO
. You want to scan only Free
to Air channels without any encryption, select
YES
. Otherwise, select
NO
to scan all FTA
and CAS channels.
Press
OK
to activate the manual scan.
This will take some minutes. As the scan
proceeds, you will see the progressive bar
and the newly found services underneath.
Summary of Contents for HD1
Page 2: ......
Page 28: ......
Page 39: ...Chapter4 Basic Operations 34 VOLUME Key If you want to reduce the page size press VOLUME key ...
