15
7. The choice of LCD display angle: see the
following diagram.
SAFETY RULES
The Digit Multimeter is a precise electronic device.
Do not tamper with the circuit and pay attention
to the following:
1. The Meter complies with IEC1010-1 pollution
Degree2 CAT I 1000V, CAT II 600V over
voltage standards. Use the Meter only as
specified in this manual, otherwise the
protection provided by the Meter may be
impaired.
2. CAT I- For signal level, telecommunication,
electronic with small transient over voltage.
3. CAT II- For local level, appliances, main wall
outlets, portable equipment.
4. The meter is designed to withstand the stated
Max. Voltages. If it’s not possible to exclude
without doubts that impulses, transients,
disturbance or for other reasons, these
voltages are exceeded a suitable prescale
(10:1) must be used.
Model UT2000: OPERATING MANUAL
