13
13. Alarm
2007
2003
2002/5
2006
2001
2004
ALARM SOUNDS
Mis-
operation
Switch positionTest leads position
A or 10A
A,mA,2A
10A
10A
A
Over
range
Display >19999*
V, ,Hz, ,
BATT
The testing value for range is meaningless.
14
.
Square wave output
Frequency approx. 50Hz, range Vp-p 2V (only
for UT2001).
OPERATING INSTRUCTIONS
1. Check the 9V battery by press down the ON
- OFF SWITCH. If the battery is weak,”
“
sign will appear on left bottom side of the
display. The sign next to the test lest lead
jacks is for warning that the input voltage or
current should not exceed the indicated values.
This is used to prevent the damage to the
internal circuitry. The function switch should
be set to the range which you want to test
before operation.
2. Except capacitance, transistor hFE and
temperature which use the special test jack,
the input terminal for all other range should
be “V/ ”, “COM” being the input earth terminal.
Model UT2000: OPERATING MANUAL
