5. Do not operate the Meter before the cabinet
has been closed and screwed safely as
terminal can carry voltage.
16
6. Make sure before each measurement the
Meter is set to the suitable range.
7. Before using the Meter, please inspect the
cabinet and test leads for damaged insulation
or exposed metal.
8. Connect the red and black test lead to the
correct measuring input jack properly.
9. Do not input values over the maximum range
of each measurement to avoid damages of
the Meter.
10. Do not turn the rotary function switch during
Voltage or Current measurement, otherwise
the Meter could be damaged.
11. Make sure to use new fuses with proper rating
to replace the bad fuses.
12. To avoid electric shock or damages, do not
apply more than 1000V between the “COM”
terminal and “
” earth ground.
13. Use caution when working with Voltages
above 60V (DC) or 30Vrms (AC). These
Voltages pose shock hazard.
14. Replace the battery as soon as the battery
indicator “
” appears. With a low battery,
the Meter might produce false reading that
can lead to electric shock and personal injury.
15. Turn off the Meter once finished measuring.
Fetch out the battery when the meter will not
be used for long period.
Model UT2000: OPERATING MANUAL
