9
Figure 3 Max current VS Frequency curve
Figure 4 Typical DC linearity (0.01V/A level)
4.
Operating instruction
Set the coupling mode of the oscilloscope to DC and the input impedance to 1MΩ; To make it easy to
read, users can set the display unit of the oscilloscope from voltage to current display. If user’s
oscilloscope doesn’t have such function, user have to manually set the corresponding attenuation ratio,
for instance, if the probe is H level (0.01V/A), the oscilloscope should be 100X; if the probe is L level
(0.1V/A), oscilloscope is 10X. User can connect the BNC output port with the input port of the
oscilloscope with standard double terminal BNC cable.
Turn the switch to ON, and the power indicator will light up green.
