Illuminated Chime Unit
To fit or replace batteries:
Slide open the battery cover, insert the batteries into the
battery compartment ensuring the battery polarities match the internal markings. Refit
the battery cover.
If the chime no longer operates the batteries should be replaced.
Please note batteries should be inserted into the transmitter unit before the illuminated
chime unit. This enables the pairing of the system. A double beep will be heard to
indicate pairing successful. Touch the Doorbell push button within 30 seconds to confirm.
Requires 2x1.5v C batteries (supplied)
Consumption
: 2 x 1.5v C (MN1400) Flashing / Sound & Light 80mA
Operating Temperature
: -10°C to +40°C
Operating Distance
: Max 80 Meters approx line of sight
Selectable Tones
: 8 Selectable melodies
Specification
Illuminated Chime Product Features
The flashing door chime has 3 modes and 8 Sounds
·
Westminster
·
Tubular 2
·
Piano
·
Ding Dong
·
Synth 1
·
Ringing Bell
·
Tubular 1
·
Synth 2
·
Chime Only ( Default)
·
Chime & Flashing
·
Flashing only
Mode
Sounds
To change modes slide off the battery door of the chime and press
’MODE’
button to cycle through the options.
Note: The chime sound will be ding dong when cycling through modes but will
revert to your chosen sound when the Doorbell is activated.
From first use and whenever the batteries are replaced, the mode will reset to
Chime Only by default
Volume Control and Mute Function
To adjust the volume, slide off the battery door of the chime unit and turn the
dial clockwise to increase volume and anti clockwise to reduce it
The mute switch can be found on the side of the chime unit. Push the switch
down for no sound, only flashing light will operate (if set to chime & flashing).
Push the switch up to restore sound.
Low Battery \ Indicator
When batteries are getting low a red LED will illuminate behind the blue lens
Mode Code
Volume
R14 or Size C
R14 or Size C
Mute
Switch
On
Off
+
+