Uneek 4x4 GU-RB-ASM5, Fitting Instructions Manual

Page: 16 / 20

If fitting a rear winch you will leave out the
stainless steel step and fit the left hand and
right hand winch brackets with the M12 x 40
button head cap screws. Use the M12 hex
bolts to secure the winch cradle to the support
brackets and torque up. The winch needs to be
mounted to the cradle before the cradle is put
on to the bumper. You will also need to rotate
the winch gear box so the free spool lever is
clear of the rear door opening up. Run the cables
for the winch and mount the control box in a spot
that will not interfere with the door operation.
Follow these instructions if fitting the LH swing
away.
Fit the arm on the bumper with bearings the
same as the RH side.
Note, rest latch pin in the upper position for
normal operation and drop it in the hole to
secure the arm open.
Use M12 button head cap screws to hold
striker pin plate in position.