3
11. Unplug the product from the wall outlet
and refer servicing to Uncle Milton
Industries under the following conditions.
A. The power-supply cord or plug is
damaged;
B. Liquid has been spilled, or objects
have fallen into the apparatus;
C. The apparatus has been exposed to
rain or water;
D. The apparatus does not operate
normally by following the operating
instructions. (Adjust only those
controls that are covered by the
operating instructions, as an
improper adjustment of other
controls may result in damage and
will often require extensive work by a
qualified technician to restore the
apparatus to its normal operation);
E. The apparatus has been dropped or
damaged in any way;
F. The apparatus exhibits a distinct
change in performance.
CARE
• When not in use, cover the lens with the
lens cap.
•
Do not touch the lens. Gently wipe off
dust using a soft cloth or lens paper.
Never use facial tissue to clean lens.
•
Occasionally dust the unit with a soft
cloth. For stubborn stains, use a soft cloth
dampened with a weak solution of mild
detergent and water. Dry the unit
immediately afterwards with a clean
cloth.
•
Do not use abrasive cloths, thinners,
alcohol, or other chemical solvents,
because they may damage the finish or
remove the lettering.
For U.S. models
FCC Information for User
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful
interference, and
(2) This device must accept any interference
received, including interference that may
cause undesired operation.
CAUTION:
Any user changes or modifications not
expressly approved by the manufacturer
could void the user's authority to operate the
equipment and will void the warranty.
NOTE:
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be
determined by turning the equipment off
and on, the user is encouraged to try to
correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment to an outlet on a
circuit different from that to which the
receiver is connected.
• Consult the manufacturer or an
experienced radio/TV technician for help.
