3. Activate & Install UnaBell LTE-M
3.1 Before You Start
The following pre-requisite steps need to be completed prior to setting up and using
UnaBell LTE-M:
✔
Register the eSIM or Plastic Nano SIM with your selected network provider
✔
Register an account on
UnaConnect IoT Device Management Cloud Platform
✔
Register the UnaBell LTE-M device(s) in a
Device Group
on
3.2 Activate UnaBell LTE-M
The activation process of UnaBell LTE-M is outlined below:
1. Unscrew and open the bottom casing of the UnaBell LTE-M.
2. Insert the Plastic Nano SIM or setup the eSIM as provided by your local network
provider.
3. Insert 2 x 1.5 V Alkaline AA batteries.
4. UnaBell LTE-M powers on and checks for Plastic Nano SIM then the eSIM to
identify the SIM to use.
5. The device then initializes and scans for the local LTE-M network for applicable
bands and sends its first downlink message.
6. UnaBell LTE-M blinks
green
light while it initializes and scans the local LTE-M
network for applicable bands (this could take up to 5 mins if it is connecting to a
new network in a new country or region).
7. If initialization and network connection are successful, the device LED displays
solid
green
light for 2 seconds.
8. After network connection is established, UnaBell LTE-M displays
orange
light
while it sends its first downlink request from the device to the UnaConnect
platform via LTE-M.
9. In response, the UnaConnect platform sends a downlink message to the device
with new configurations if available (the downlink process may take 30-40 secs).
10.If initialization or network connection failed, UnaBell LTE-M displays solid
red
light for 2 seconds.
Please unplug and replug the batteries to try again
.
11.Screw back and close the bottom casing.
9
UnaBell LTE-M User Guide
Summary of Contents for UnaBell LTE-M
Page 1: ...UnaBell LTE M User Guide ...