background image

8. Click on the

Done

button on the top right corner to confirm the setting.

9. After the above steps have been completed on the UnaConnect cloud platform,

UnaBell LTE-M will conduct the FOTA process when it performs its next

scheduled downlink

, or you may wish to

manually trigger a downlink (by resetting

the device or unplug and replug the batteries)

.

To check if the UnaBell LTE-M device has completed the FOTA process in its
scheduled downlink, you can click on the

Devices

tab on the menu on the left, click

on the

device name

, then click on the

Information

tab on the top of the page. Then

check that the

Firmware version

of the device has been updated to the new

Firmware version number. If it remains as the previous Firmware version number,

then the FOTA process has not been successful and you may retry the steps above.

Please take note of the following measures designed to ensure that all devices are

aligned and updated to the same and latest firmware:

When multiple firmware files are uploaded on UnaConnect,

the latest or

newest firmware version will be used for FOTA.

After the firmware has been updated on the device,

any firmware version

that is older than the device firmware cannot be updated to the device
(and no back track is available).

25

UnaBell LTE-M User Guide

Summary of Contents for UnaBell LTE-M






























Reviews: