Umirs Europe Ltd. Predix
- 23 -
The receiver also has a „Disarmed” function
(available on devices with firmware version
3.9 or later). This way the detector gets
disabled with the power supply and the
status of the output relay staying normal.
Switching to „Disarmed” state is also
indicated by the LED on the transmitter’s
circuit board flashing three times. To
choose „Disarmed”, after having pressed
„Begin” choose Modify, then choose
„Disarmed”. Press „Finish” to finish the programming and fynalize the settings.
Lower You can see the Demodulation Frequency: this parameter should be between 2700 and
3000 – in this case the communication between the transmitter and receiver is optimal.
The last line indicates the noise level. In case of high noise level make sure, that You use a proper
power supply unit.
„Signal” shows the actual signal level, received from the transmitter.
„Threshold” shows the actual height of the detection threshold.
Further functions of the software:
Common
Here You can modify the User and
Administrator profiles.
Also here is the event log of the device.It
can store up to 10 000 events, after which
the system automatically rewrites the oldest
events.
System
Here You can see the data about the
connected Transmitter or Receiver.
