![background image](http://html1.mh-extra.com/html/umax-technologies/supermac-c600x/supermac-c600x_user-manual_3551223094.webp)
The combined power consumption of installed cards must not exceed
the limits specified for your computer. If you have more than one card
installed, check the information that came with your cards to make
sure that their power consumption is within the limits specified in
the booklet Technical Specifications.
Some cards may need to be installed by a qualified service provider.
Check the information that came with the card to see if this is
necessary. If you are uncomfortable working inside your computer,
you may prefer to have a service provider install the card even if their
assistance is not required.
To install an expansion card:
1.
Turn the computer on its right side.
2.
Remove the two Phillips-head screws from the top left
and right corners of the bottom metal panel.
3.
Slide the bottom panel up until the side tabs disen-
gage.
4.
Remove the metal access port cover behind the expan-
sion slot you want to use
.
Remove the mounting screw at the top of the metal access port
cover, then lift off the cover plate and set it aside
.