![background image](http://html1.mh-extra.com/html/umax-technologies/supermac-c600x/supermac-c600x_user-manual_3551223103.webp)
The SCSI cable runs from the motherboard to the CD-ROM player
with four connectors between. Use a connector closest to the drive.
7.
Attach a power cable to the drive.
See “Attaching Cables to Internal Devices” later in this chapter
.
To install a 1-inch high, 3 1/2 inch hard drive in bay number 6 or 7:
1.
Remove the screw from the
rear of the cage
.
2.
Swing the cage out until it is vertical.
3.
Insert the drive, component side down, connector fac-
ing the back of the computer, into one of the
drive
bays .
4.
Align the 2 screw holes on the outside of the drive cage
with the screw holes on the drive, and insert the
screws.
5.
Lower the drive cage.
6.
Insert the screw in the rear edge of the cage.
7.
Attach a SCSI connector to the drive.