![background image](http://html1.mh-extra.com/html/umax-technologies/astracam-1800/astracam-1800_user-manual_837833011.webp)
UMAX AstraCam 1800 Owner's Guide
9
2. Press the DELETE button again to erase all the photos from the camera's
memory. The film counter returns to "10", “20” or "50" depending the
image mode settings.
Note: You can also delete photos from your camera using the UMAX
PhotoStudio program.
Camera Memory Full
When you run out of shots, a continuous beep sounds and the green light comes
on to signal that camera memory is full. The film counter reads "0." It's time to
download your photos to a computer and delete the images off the memory
card.
Viewing Images on a TV
The UMAX AstraCam 1800 is equipped with a video out port for viewing
images on a television.
Connect to a TV
1.
Simply plug the included video cable into the video out port on the side
your UMAX AstraCam 1800. Plug the other end of the cable into the
television video in port (typically yellow in color).
2.
Power the camera and television on.
3.
Switch your TV video signal to the Video 1 or Video 2 depend on your
TV / VCR systems. You should see video produced by the camera. If you
do not, starting with channel 2, simply change channels on the television
until video appears.
Display / Delete images:
1.
Press the right or left arrow button to scroll through the images.
2.
When you find a photo you would like to delete, press the Delete.
3.
The television will display ERASE. Press
4.
Delete again to delete the picture. If you decide not to delete the picture,
wait a moment and the ERASE prompt will go away.
Auto slide show
1.
Press the right or left arrow button twice to scroll through the images
automatically.
2.
To stop the slide show, press the right or left arrow button.