Umano Medical ook cocoon, User Manual

Page: 26 / 81

OPERATING INSTRUCTIONS
24
USER MANUAL — 74-36103-ENG R6
System signals and messages
The hospital bed FL36 can issue a signal or a message to inform the user that an action is required. It can be
visual and/or audible and/or textual if bed is equipped of the display screen.
Visual signal
A visual signal may take the form of flashing LEDs on the membrane of the footboard for a bed equipped of a
bed exit system. A reset or a component replacement may be required; contact the maintenance department for
verification.
If the LED for bed power supply, located on the siderails, is flashing when using a one-touch button, it indicates
that the bed must be plugged into the main power supply for usage of this feature.
Audible signal
An audible signal can be caused by an insufficient level of battery charge; plug the bed into the main power supply.
An audible signal can be issued from the control box situated under the seat section. A verification of connections,
a calibration or a component replacement may be required; contact the maintenance department for verification.
IMPORTANT
If the audible signal is emitted from the foot board or, through the nurse call system, it indicates that the bed exit
system as detected a movement from the patient or, that the patient as press the button of the nurse call. In both
case, the patient requires assistance from a caregiver.
Textual error message (with display screen option only)
A textual error message can be displayed on the screen located on the footboard. A reset, a verification of
connections, a calibration or a component replacement may be required; contact the maintenance department
for verification.
Transporting bed
Unplug cables from wall outlets (power cord, nurse call, communication, etc.), store power cord on support
brackets and adjust height of bed for an ergonomic posture before initiating bed transportation. If transporting
bed with a patient in the bed, lock siderails up and adjust height of bed at the lowest height while as ergonomic
as possible. If bed is equipped with the plastic boards, use the built-in pull and push handles located in the
corners of the headboard and footboard. If bed is equipped with the MDF boards, use the top of the footboard
and headboard to move the bed. Do not use siderails to move the bed. If not avoided, situation could result in
mechanical damages, which could lead to patient fall.