SK00-4390-DI-002-11
xii
0.5 Acceptance and Storage of The Pump
0.5.1 Unpacking/Acceptance of The Pump
This product is packed with the wooden frame. Please ask the special
agency for dismantling it.
Advise the dismantling agent to wear leather gloves and use appropriate
tools such as pinch bar as they have a risk of cutting the hand by nail or
chip.
Give the instruction them further to use the unloading machinery such as
crane to take out the product of the wooded frame, lift it up with its top
eyebolt and transfer it on lifting. Check the eyebolt whether it has no error
before use.
Only the technically entitled person should be in charge of conducting the
unloading operation and operating the unloading machinery.
There is a risk that the Pump might drop or lay down when attempted
unreasonable operation or machinery setup was not sufficient. You are
strictly restricted to enter beneath the Pump.
Advise the dismantling agent to wear leather gloves and use appropriate
tools such as pinch bar as they have a risk of cutting the hand by nail or
chip
.
Upon delivery of the product, check first that the delivered is exactly what you have ordered
and there is no break or damage through transport or the like. Claim after use of the product
might be resolved with a charge.
Although we pay full attention on shipping, you are kindly requested to check the following
upon unpacked the product.
IMPORTANT
Whether the delivered is exactly the one you have ordered.
Whether accessories (Pump oil for one lubrication, optional parts) are
attached or not.
Whether there is no break or damage through transport or not.
Whether any bolt or nut got loose or taken off through transport or not.
Should you found any trouble, please do not hesitate to contact our Sales
division or your agency.
WARNING
Summary of Contents for VS1501
