QSx Operating Manual
6
C6054101 (June 2020)
Quick guide
Pour cold water into the bath
up to the “FILL TO” line
(Do not overfill).
Add the required dose of detergent (see page 23).
Switch on the machine via the switch at the rear of the unit, just above the
electrical mains lead.
Press the “
START
” key to accept the
programmed cleaning cycle settings
and start the cleaning cycle.
At the end of the cycle, remove the basket from the bath and rinse the
items under clean running water.
The lid can be inverted and the basket placed on top to catch excess liquid
as the items dry.
REMEMBER
-
Always ensure the liquid is above the level sensor when in operation.
-
Do not put hot water above 50°C into the bath.
-
Always use the basket.
-
Never expose hands to cleaning solutions.
-
Never use toxic, flammable, acidic, caustic or corrosive solutions.
-
Never breathe the fumes from strong solutions.
-
Rinse the items in clean water once the cycle is complete.
Subjecting the bath to improper treatment or misuse will invalidate the
warranty.
