QSx Operating Manual
8
C6054101 (June 2020)
When the power is turned on and the liquid level is too low, the following
screen will display.
The level sensor can be disabled for specialist cleaning applications where
deionised (DI) water is used (see page 20).
When the bath is filled with liquid to the correct level, you will be given the
option to degas. (The need for degassing is explained on page 24).
You will need to degas the liquid to ensure good cleaning efficacy.
By choosing YES, your QSx ultrasonic bath will run an automatic de-gas
cycle. The following screen will display.
The degassing process is to remove all bubbles from the water as these
impede the cleaning performance. Once all of the bubbles have come to
the surface, complete the degassing cycle by pressing the
key.
Note:
If the machine detects low liquid level for more than 5 seconds, it is
assumed that the bath has been filled with fresh water, and you will be
given the option of running another degas cycle.
