9
The
Neon Series
is fitted with a liquid temperature sensor. If this temperature is below
the minimum set temperature, the heaters will operate and begin to heat the cleaning
fluid once the machine is turned on.
When the heaters are in operation, the symbol above Ht will oscillate showing the
heaters are in operation.
Pressing the ‘enter’ button (under the flashing Start) will start a pre-set cycle, as long as
the recorded temperature of the cleaning fluid is above the minimum programmed
temperature.
The
Neon Series
cycle will now begin, indicated by the ‘Running’ message on the display.
The ultrasonic cycle will run for the programmed time and any re-circulation will also
run once at the cycle start point, and once at the end of the cycle.
The display will illustrate the temperature of the bath during operation and the cycle
time remaining.
