Ultrawave Hygea 2850VM, Operator'S Instruction Manual

Page: 7 / 40

6
Operator instructions
Ensure you Hygea 2850VM ultrasonic bath is plugged into a 220-
240V fully earthed supply.
Once plugged in, switch on your
Hygea 2850VM via the power
on/off at the rear of the unit.
When the
Hygea 2850VM is first switched on, the following screen will appear for
approximately 5 seconds.
While this screen is displayed, the buttons are inoperative. This is normal as the
Hygea
2850VM is running through its start-up routine and checking all internal systems are
working correctly.
The top line of the display indicates the
Hygea 2850VM serial number. This uniquely
identifies the machine.
After 5 seconds, the
Hygea 2850VM is ready for use.