Ultrative WOC, User Manual

Page: 44 / 60

Outbound Call
SIP Trunk
SIP trunk provides IP-based call connectivity between WOC and the internet telephony service
provider’s (ITSP) SIP server, and you can make calls to where in the world. With the massive
deployment of wireless and wire line IP network, IP-based telephony networks and terminal devices
will become the mainstream solution for voice communication.
To set up a SIP trunk, you need to apply for a SIP account from your ITSP, and configure the WOC
through Web GUI accordingly.
Setting IP Trunk
1. Click Voice from the home page.
2. Click Trunk > IP Trunk > Add to configure the following trunk parameters.
If you want to connect to IP trunk Connect, please fill in the parameters.
Account type
Registration server
Sub-domain
Trunk ID
Password
Concurrency
Registration
Trunk type
Normally IP trunk is selected unless you want to connect the WOC to Skype.
Configure the IP address and port number of the registrar. The WOC supports
multi-platform registration.
It is provided by your ITSP, such as salesdepart.abccompany.com .
It is provided by your ITSP, such as
62019550185
.
It is provided by your ISTP, such as 12345678.
Specify the number of concurrent calls that are allowed by your ITSP on
the IP trunk. This parameter needs to be configured when IP trunk is
selected. The limit is 8.
This parameter needs to be ticked off.
IVR
: a greeting message will be played for all incoming calls. The greeting
message can be changed by replacing the voice file or recording the
message on a phone connected to the device.
DID
: an incoming call will be directed to a bundled extension without
going through IVR. The call-out usage restriction of the DID trunk can be
configured. If the Share is selected, this trunk can be used to make
outgoing calls by other extensions. If the DID only is selected, this DID
trunk is available only for the bundled extension.
If you want to connect to Skype Connect, please fill in the parameters.
SIP User
Password
Enter the SIP User of your SIP Profile.
Enter the password of your SIP Profile.
Skype Connect address Enter the Skype Connect Address of your SIP Profile.
UDP Port
Add Skype Number
3. Click Apply .
44
Enter the UDP Port of your SIP Profile.
Click Add if you have Skype Online Numbers.