Ultratec Uniphone 1150, User Manual

Page: 50 / 62

4 8 • C A R E A N D R E P A I R
The personal indicator does not flash when I receive a call.
You have lost external power and the Uniphone 1150 is working on battery
power. The Uniphone 1150 saves battery power by not suing the personal
indicator. Make sure the AC adapter is plugged in firmly. After external
power is restored the personal indicator should work properly.
If I change the battery, will I lose setting changes I have made?
You have approximately 45 seconds after removing the old battery and
installing a new one before the memory is erased.
Resetting the Uniphone 1150
If the Uniphone 1150 has power but is not working properly, you may be
able to correct the problem be resetting it. Resetting returns all options
to their original settings and erases all conversations and auto-answer
messages. To reset the Uniphone 1150:
1.
Press the left
Shift
key, the right
Shift
key, and the
Menu
key all the same
time. The display will give a serial number and say RESET Y/N. time. The display will give a serial number and say RESET Y/N.
IMPORTANT!
Everything in memory will be erased. There is no
way to get the contents back after you erase them.
2.
Press the
Y
key to reset. The display says UNIPHONE RESET. Press any
other key if you change your mind and decide not to reset the Uniphone
1150.