Ultratec Uniphone 1150, User Manual

Page: 12 / 62

What kind of telephone line?
You need a standard analog home phone line with either pulse or tone
dialing. In an office with a digital phone system, you may need to modify
your line. Contact your telephone installer to be sure your line supports a
standard single-line home telephone (this is the same kind of line you need
for a fax or computer modem).
CAUTION!
Do not plug the Uniphone 1150 into any line other than a
standard telephone line. If you do, you may damage your telephone system
or the Uniphone 1150. You will also void your warranty.
Connecting a signaler light
If you want to use a signaler light with the Uniphone 1150, plug the signaler
light into an unused extension telephone wall socket. If you only have one
socket in your house or office, use a Y-jack (also called a duplex jack) to
plug in both the Uniphone 1150 and the signaller into the same socket. You
can get a Y-jack at any shop that sells telephones.
Setting pulse/tone dialing
The Uniphone 1150 is set to tone dial. If your telephone line uses pulse
dialing, set the dial switch on the back of the Uniphone 1150 to PULSE.
Contact your telephone company if you do not know whether your telephone
line is pulse or tone.
About the Menu key
Press the
Menu
key to display different Uniphone 1150 functions. The menu
displays five functions that you can select: GREETING, CLEAR,
AUTO-ANSWER, OPTIONS, and CODE.
1 0 • S E T - U P
MENU: [Greeting] Clear
Auto-ans Options Code