Ultratec Uniphone 1150, User Manual

Page: 21 / 62

C A L L I N G • 1 9
Call progress
The signal light and display show you what is happening on the telephone
line in the following ways:
Display
Signal light Message Telephone line
Stays on before dialing Dial tone
Stays on after dialing LINE UNOBTAINABLE No connection
Steady flashing ENGAGED Engaged
Slow flashing RING Ringing
Irregular blinking Other person is
picking up handset,
speaking, or sending
voice announcer
Text-telephone dialing tips
•
If you make a mistake while dialing, hang up (hold down the
Shift
key and press the
TTY On/Off
key) and start again.
•
To re-dial the last number called, press the
Dial
key and then the
key.
•
In an office, you may need to use a 9 or another number for an
outside line.
• Use a ! for a hook flash. A hook flash is sometimes used in a voice
mail system or to disconnect from one line and go to another without
hanging up.
• Press the
Shift
key and the
R
key to perform a register recall.
• You cannot use * and # with pulse dialing.