Answering a direct VCO call
1.
When the Uniphone 1140 rings and the flasher blinks press
the
key and type a greeting.
2.
Watch the display for a response.
3.
When VCO is requested, pick up the handset to either speak
or listen.
4.
Speak and read or listen and type responses.
5.
When you are finished, replace the handset and hang up the
Uniphone 1140 by holding down the
key and pressing
the key.
Using Hearing Carry Over (HCO)
For people who can hear but are speech impaired, the Uniphone
1140 can be used to make HCO calls. HCO is the opposite of VCO.
The caller types to the other person (or relay service CA) and then
listens to the other person’s reply.
Making an HCO call
1.
Press the
key. You will see the following display screen:
2.
Dial the telephone number.
3.
Pick up the handset and listen for a response. You will see
TEXT–TELEPHONE VCO on the display screen.
4.
After someone answers, type a greeting.
5.
Continue to listen and type until your conversation is
finished.
6.
When you are finished, replace the handset and hang up the
Uniphone 1140 by holding down the
key and pressing
the key.
Note:
If you make a direct HCO call (without relay), the person
you call must have a TTY to read your typed message.
TTY On/Off
Shift
Dial
TTY On/Off
Shift
TTY On/Off
3 2 • A DVA N C E D C A L L I N G
