UltraTape UltraLabel PRO-600, User Manual

Page: 27 / 70

- 19 -
3.3.2 Loading Media in Cutter Mode (Option)
1. Please refer to section 3.3.1 to feed the
paper, printing side face up, through the
paper guide and pass over the platen.
2. Lead the paper through the cutter paper
opening.
3. Move the media guides to fit the label width
by pushing the media guide adjustment
button.
4. Close the top cover gently.
5.
Use “Diagnostic Tool” to set the media
sensor type, calibrate the selected sensor
and set the post-print action to
“CUTTER”.
PUSH