Issued/Revised: 04/22/13
ADA STEPS 02-07-5000
u
PLAY TODAY
800.458.5872
www.ultraplay.com
39
Parts List
PART NUMBER
QTY
DESCRIPTION
02-07-0008
1
ADA BARRIER LEFT
02-07-0010
1
ADA BARRIER RIGHT
02-07-0043
4
1" FOOTER
02-07-0005
1
ADA TRANSFER STAIR
02-07-0004
1
ADA DECK
02-07-0047
1
ADA DECK SUPPORT POST
02-07-0011
1
ADA HANDHOLD
02-07-0006
1
ADA STEP
02-07-0060
2
8 1/4" EXTENSION POST
02-07-0061
2
15" EXTENSION POST
02-07-0046
2
FOOTER PLATE
33-12-0079
1
33-11-0003*
13
M10 x 25mm (1") BHCS BOLT
33-11-0005*
8
M10 x 35mm (1 3/8") BHCS BOLT
33-11-0010*
4
M10 x 50mm (2") BHCS BOLT
33-11-0007*
2
M10 x 60mm (2 3/8") BHCS BOLT
33-11-0200*
32
M10 FLATWASHER
33-11-0400*
27
M10 LOCK NUT
33-11-0103*
12
M8 x 25mm (1") BHCS BOLT
33-11-0301*
4
M8 LOCKWASHER
33-11-0500*
8
M8 LOCK NUT
33-11-0700*
4
CLAMP RIVET
HARDWARE COMPLETE
Items listed below Hardware Complete line are included with Hardware Complete Number
Warning: During Installation, Hardware And Small Parts Are Choking Hazards For Young Children. Store
Unused Parts Appropriately Until Assembly Is Completed. Once Assembly Is Completed, Remove Any
Unused Parts From The Play Environment And Dispose/Save Them In A Secure Location. Any bolt end
protruding more than two full threads beyond the face of the nut causes risk of clothing entanglement.
Promptly cut-off flush, file smooth, and treat to prevent corrosion.
Unless Otherwise Specified, All Units of Measure are Each
Note: Peen Tee-Nuts and Flatwashers to match radius of pipe after assembly is complete.
Note: Loctite (supplied by others) should be used on any non-patch hardware.
INSTALLATION INSTRUCTIONS:
IMPORTANT: DETERMINE WHICH MOUNTING OPTION YOU ARE USING; SURFACE MOUNT, ONGROUND, OR IN-GROUND.
1. Choose the appropriate hole in Barrier Footer for your surfacing application.
2. Attach ADA Barriers to Barrier Footers using M10 x 35mm B.H.C.S. Bolt and M10 Lock Nut. See Detail 028.
3. Attach ADA Barriers to Tube Clamps using M8 x 25mm B.H.C.S Bolt and M8 Lock Washer. See Detail 029.
4. Attach Tube Clamps to Uprights using M8 x 25mm B.H.C.S. Bolt and M8 Lock Nut. See Detail 030. (Do not install Clamp Rivet
until entire unit is assembled)
5. Clean all slots in stairs, decks, and steps with utility knife if necessary.
6. Attach ADA Transfer Step to Deck using M10 x 25mm B.H.C.S. Bolt, M10 Flat Washer, and M10 Lock Nut. See Detail 031.
