8
1. Important information
Before using the ultraHEAD-LOCK II, please read the operating manual and safety
instructions carefully. Keep the operating manual in a safe place to avoid operating errors.
Should you require further information or encounter diffi culties in its use or maintenance,
please contact your local dealership or ultraMEDIC GmbH directly. Always specify the LOT-
or serial number to identify the ultraHEAD-LOCK II.
1.1 Intended use of the product
The ultraHEAD-LOCK II is a head restraint system for use with spinal boards and intended
for patients aged 2 years and older.
1.2 User groups
This product may only be used by qualifi ed, expert personnel. A prerequisite is theoretical
and practical experience in handling head restraint systems.
1.3 Warranty terms
The manufacturer grants a warranty period of 24 months on this product. The warranty
only encompasses the costs of the spare parts.
The following points are not covered by the warranty: a) possibly omitted shipping or
labour costs incurred on the purchaser’s side; b) defects in the product due to normal
wear and tear; c) damages caused by the user; d) defects or damages caused by non-
compliance with the instructions in this document; e) any modifi cations or repairs to the
product without prior approval by ultraMEDIC GmbH.
1.4. Declaration of conformity
The ultraHEAD-LOCK II was manufactured in accordance with the current EU regulation. A
declaration of conformity for these products can be acquired from the local dealership or
the manufacturer.
2. Information on the safety and protection of the product
1. Before and after every use, check the components and patient
restraining belts for damage and completeness.
2. Ensure that the patient restraining belts are correctly installed.
