7
INSTALLATION
TITAN DUAL LEG
INSTALLATION
TV INSTALLATION:
Attach the Screen Hanging Rails to the back of the TV using the
correct size screws for your screen as supplied in the Bolt Kit.
Ensure Hanging Rails are properly aligned and there is no more
than 75mm between the bottom of the TV and the bottom of the
Hanging Rails. If the screen needs a slight tweak to the level, use
the Levelling Screws on the top of the Hanging Rails.
Lift the TV onto the Cross Rails, ensuring that the TV is central.
There should be a minimum of 30 mm from the bottom of the TV
to the bottom of the lift for cable clearance.
When satisfied with the positioning, lock the TV into place using the pre-installed Rails Locking Screws at the
bottom of the Hanging Rails.
HINGED LID INSTALL:
Position the Titan in its final installation position and secure through the baseplate to
the floor using at least 4 appropriate anchors (not supplied),
Hang the TV with the Hanging Rails onto the Titan Lift.
Adjust the Hinged Lid Opener so that it sits 8 mm proud of the top of the TV as the
openers push against the Hinged Lid to open it. If the TV is sitting too low, adjust the
position of the Rails on the TV. If the screen needs a slight adjustment to be level,
use the pre-installed Levelling Screws on top of the Hanging Rails.
Once the TV is in its correct position, lock it in place by tightening the pre-installed
Rails Locking Screws at the bottom of the Hanging Rails.
OPTIONAL
FIXED
LID
INSTALL
Remove the Hinged Lid Openers to make way for the Fixed Lid Brackets.
Attach the Fixed Lid Brackets at the desired height for your Lid using the M4x12mm
screws that originally held the Hinged Lid Openers. Make sure the Lid Openers are
securely attached.
The lid can now be attached to the Lid Holders using the provided holes.
For more detailed measurements and dimensions please see Page 6.
Min 8 mm gap between the TV and lid