10
OPERATION: DPG1C BLUETOOTH
TITAN DUAL LEG
OPERATION: DPG1C BLUETOOTH
Follow these instructions if your product has the Bluetooth controller and handset option.
BEFORE FIRST USE:
Download the LINAK “Desk Control” app from your device’s respective App Store.
TO SET UPPER LIMIT:
•
Adjust the Lift to the maximum allowable height.
•
Press the Bluetooth button and tilt the controller up at the same time for 8 seconds until the LED strip
blinks and then goes solid White.
•
Release the Bluetooth Button and DPG1C. The upper allowable travel limit is now set. The Lift will not
travel past this point.
TO PAIR WITH BLUETOOTH:
•
Make sure Bluetooth is turned on your device
•
Open the Desk Control App on your device
•
On the DPG1C, press the Bluetooth button for two seconds to enable pairing mode, the LED Strip will
turn Blue.
•
The Display on the DPG1C will inform the user about the Bluetooth ID of the Lift. Look for this ID in the
Desk Control App and connect to it.
TO OPERATE THE LIFT:
•
Open the Desk Control app and Connect to the Lift
•
Use the up and down arrows to operate the lift. The Lift will travel to the Max Upper Limit set up
previously in the setup process.
LED LIGHTING STRIP
FAVOURITE POSITIONS
BLUETOOTH
REMINDER
DPG1C Controller with Bluetooth