NT228B GB2
31 / 98
Faults Report Table:
A “Flow fault” message does not
mean that the device is faulty.
It indicates that actual conditions
do not permit velocity and flow
measurement on the tested pipe or
the considered chord.
------ FAULTS ------
------General-------
XXX XXX XXX
--------Pipe--------
XXX XXX XXX
Other messages or warning:
In measurement mode, when a value is replaced
with - - - -, this means that there is no result.
At the bottom of the measurement screens, if display shows
, this is fault
warning: > Consult fault report.
01/08/2008 11h10mn33
---Battery Range----
78
%
This screen shows actual date
and time.
And also the battery condition
(see 19.1)
08/01/2008 13h56mn55
-----Power Off------
07/01/2008 12h12mn40
-----Power On ------
08/01/2008 10h24mn32
This screen shows also actual
date and time
plus date and time of last
switching Off/On.
Measurement menu can show other displayed screens depending on the activated
functions in Configuration menu.
