NT228B GB2
16 / 98
General precautions / Cleaning:
UF 801-P/PB is a very reliable instrument. It has been designed for general and
special service work as requested. Always respect the usual handling precautions
and special instructions given in this manual.
Some macro components (LCD display) or flat cable connections could be
susceptible to vibration. Protect the device from heavy shocks and poor
transportation conditions. For instance, if you travel by air, keep UF 801-P/PB in
its bag and place all items in the over head locker rather in baggage
compartment.
Never leave the UF 801-P/PB in the sun. The black of LCD display can cause
overheating and damage the liquid crystals; this is the same with too cold
conditions.
On dirty sites, please keep the UF 801-P/PB inside its protection bag.
We can deliver UF 801-P with a transparent protection tape on the LCD display PU
glass, to prevent it from scratches. Contact Ultraflux for such a protection and for
replacements.
If the UF 801-P/PB is dirty after some use (finger prints, muddy water
projection…), clean the instrument with a soft cloth. Do not use detergents.
Alcohol solution is acceptable.
Remove traces of acoustic gel from the probes with a paper tissue before storage.
Be careful with the powerful magnets of concerned supports (SE/SU 1707…).
Never remove them from their housing.
For long term storage conditions, please keep all items in the packing case.
Meanwhile, if this storage is very long (many months), please note that the
batteries will become discharged (current for the clock…). We recommend doing a
complete charging cycle every 2 months and leave the device in a charged
condition (see here after).
Recommendations to a new user
:
(See also the short form user guide)
Look through the different menus, without changing the settings at this stage.
Note that some functions have a different action following a short or a long
pressing action. As an example, a short press on F pages forward to the next
menu and returns to measurement menu after a long press.
Inside some menus, pressing A & B can have a dedicated function that is shown
at concerned display screen bottom (as for instance “by default screen” selection
in measurement menu).
