Installation manual
page 8
of 27 -
ZTF TILLER SYSTEM
1 PRODUCT DESCRIPTION
1.1 ZTF Tiller System description
The ZTF Tiller System is a hydraulic device that neutralizes the propeller torque of outboard engines on the
tiller handle while the operator is not actively making a steering course change. It enables the operator to
maintain the desired course without excessive physical effort.
The hydraulic valve opens the moment the operator makes a steering course change at which point the
propeller torque will be present on the tiller handle. It is important that the operator maintains a firm grip
on the tiller handle at all times while operating the boat; especially when making steering course changes.
The ZTF Tiller System consists of four main components:
Tiller handle (supplied directly by Yamaha
®
or one of its resellers)
Main device
UC130 ZTF hydraulic cylinder
Hydraulic hoses
1
2
3
NOTICE
The ZTF Tiller System is always supplied oil-filled, purged, functioning and with properly connected hoses.
Avoid twisting, damaging, bending and disconnecting the hoses.
CAUTION
The ZTF Tiller System must be used combined with
Yamaha
®
outboard engines of 90-115-130 HP produced
from 2015 to date, and engines of 150-175-200 HP - models 2.7L F150 Mechanical, VF150 V MAX SHO, F175,
VF175 V MAX SHO, and F200 Mechanical -
and must be assembled only on boats specifically designed and
suitably equipped for being steered with the tiller handle. The installer and the operator are responsible for
ensuring the proper functioning of the ZTF Tiller System on the boat, bearing in mind factors like speed,
motor loads and working conditions.
CAUTION
For installations other than the ones required for above-mentioned Yamaha
®
engines, please contact
UFLEX
Technical Assistance Service.
CAUTION
Do not use this device for purposes other than those it was made for, as specified in the installation manual.
1
4
4
2
3
CAUTION
