Installation and maintenance manual
ULTRAFLEX
page 8
of 35 -
T73NRFC-T74NRFC STEERING SYSTEMS
E
N
G
L
ISH
3 INSTALLATION
3.1 Necessary tools
Phillips
screwdriver
Open end
wrench
10mm [0,39”]
3.2 Helm positioning
To install the helm on the boat, please refer to the assembly instructions supplied with
ULTRAFLEX
X34
and X35 bezel kits.
3.3 Connection of the cable to the helm
1
Determine the correct entry position of the cable into the helm according to the proper steering
system.
PUSH OR PULL TURNING DIRECTIONS
2
R e m o v e
protective pipe
from
cable
ULTRAFLEX
M66
and insert the
helix
cable
into the helm.
3
Turn the steering wheel so as to "pull" the cable into the helm, aligning
the end fitting recess (A) with screw hole (1).
1
A
T73NRFC
T74NRFC
1
A
